← previous
next →
Product available Ships today (order by 14:00) CO2 GPSR PPWR REACH

MW 6x2 / N38 - cylindrical magnet

cylindrical magnet

Catalog no 010092

GTIN/EAN: 5906301810919

5.00
Load capacity 0.86 kg / 8.43 N Magnetic Induction 343.37 mT / 3434 Gs
Diameter Ø
6 mm [±0,1 mm]
Height
2 mm [±0,1 mm]
Weight
0.42 g
Magnetization Direction
↑ axial
Coating
[NiCuNi] Nickel

How we measure these parameters — certificates and measurements

check specifications »

0.200 zł net / pcs

0.246 zł with VAT (23% VAT) / pcs

price for transport

bulk discounts:

Need more?
Quantity
Net
Gross
price from 1 pcs
0.200 zł
0.246 zł
price from 1600 pcs
0.1880 zł
0.231 zł
price from 3200 pcs
0.1760 zł
0.216 zł

Frequently asked questions

What is the maximum working temperature of a disc magnet?
Standard N-series grades work up to 80 °C. Grades N50, N52 and N54 have a lower limit of 60 °C, because coercivity falls as BHmax rises. Higher temperatures require the H (120 °C), SH (150 °C), UH (180 °C), EH (200 °C) or AH (230 °C) series. Within the working range the magnet loses about 0.11% of its induction per degree, and that loss is reversible.
What is the difference between N38, N42 and N52?
The number after N is the energy product BHmax. Moving from N38 to N52 raises it by several tens of percent, but the real holding force increases by roughly 20%, because force also depends on geometry and on the magnetic circuit. N52 costs about twice as much as N42, so for most mounting work N38–N42 is the best price-to-force ratio.
What is the dimensional tolerance?
±0.1 mm as standard, ±0.05 mm to order. The tolerance is stated next to the dimensions on every product page.

Guides from the knowledge base

Engineering report for this magnet

Full PDF analysis: pull and shear force, effect of distance, temperature and plate thickness, safety distances and the demagnetization curve.

PDF report Calculator
Want to talk magnets?

Call us now +48 888 99 98 98 alternatively let us know using contact form the contact section.
Specifications and structure of a neodymium magnet can be estimated using our power calculator.

Order by 14:00 and we’ll ship today!

Product card - MW 6x2 / N38 - cylindrical magnet

Specification / characteristics - MW 6x2 / N38 - cylindrical magnet

properties
properties values
Cat. no. 010092
GTIN/EAN 5906301810919
Production/Distribution Dhit sp. z o.o.
ul. Zielona 14 05-850 Ożarów Mazowiecki PL
Country of origin Poland / China / Germany
Customs code 85059029
Diameter Ø 6 mm [±0,1 mm]
Height 2 mm [±0,1 mm]
Weight 0.42 g
Magnetization Direction ↑ axial
Load capacity ~ ? 0.86 kg / 8.43 N
Magnetic Induction ~ ? 343.37 mT / 3434 Gs
Coating [NiCuNi] Nickel
Manufacturing Tolerance ±0.1 mm

Magnetic properties of material N38

Specification / characteristics MW 6x2 / N38 - cylindrical magnet
properties values units
Remanence Br ? 12.2-12.6 kGs
Remanence Br ? 1220-1260 mT
Coercivity bHc ? 10.8-11.5 kOe
Coercivity bHc ? 860-915 kA/m
Intrinsic coercivity iHc ≥ 12 kOe
Intrinsic coercivity iHc ≥ 955 kA/m
Energy product BHmax ? 36-38 BH max MGOe
Energy product BHmax ? 287-303 BH max KJ/m
Maximum working temperature ? ≤ 80 °C

Physical properties of sintered neodymium magnets Nd2Fe14B at 20°C

Physical properties of sintered neodymium magnets Nd2Fe14B at 20°C
properties values units
Vickers hardness ≥550 Hv
Density ≥7.4 g/cm3
Curie Temperature TC 310 °C
Curie Temperature TF 590 °F
Specific resistance 150 μΩ⋅cm
Bending strength 250 MPa
Compressive strength 1000~1100 MPa
Thermal expansion parallel (∥) to orientation (M) (3-4) x 10-6 °C-1
Thermal expansion perpendicular (⊥) to orientation (M) -(1-3) x 10-6 °C-1
Young's modulus 1.7 x 104 kg/mm²

Physical simulation of the magnet - report

The following data represent the outcome of a physical simulation. Results were calculated on models for the material Nd2Fe14B. Actual performance might slightly differ. Please consider these data as a supplementary guide for designers.

Table 1: Static pull force (pull vs gap) - power drop
MW 6x2 / N38

Distance (mm) Induction (Gauss) / mT Pull Force (kg/lbs/g/N) Risk Status
0 mm 3430 Gs
343.0 mT
 0.86 kg / 1.90 LBS
860.0 g / 8.4 N
 safe
1 mm 2423 Gs
242.3 mT
 0.43 kg / 0.95 LBS
429.2 g / 4.2 N
 safe
2 mm 1521 Gs
152.1 mT
 0.17 kg / 0.37 LBS
169.0 g / 1.7 N
 safe
3 mm 932 Gs
93.2 mT
 0.06 kg / 0.14 LBS
63.5 g / 0.6 N
 safe
5 mm 382 Gs
38.2 mT
 0.01 kg / 0.02 LBS
10.7 g / 0.1 N
 safe
10 mm 76 Gs
7.6 mT
 0.00 kg / 0.00 LBS
0.4 g / 0.0 N
 safe
15 mm 26 Gs
2.6 mT
 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
 safe
20 mm 12 Gs
1.2 mT
 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
 safe
30 mm 4 Gs
0.4 mT
 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
 safe
50 mm 1 Gs
0.1 mT
 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
 safe
Magnetic force weakens significantly with every mm of gap. Note that even a very thin break (e.g., dirt, paint, rust) strongly weakens the grip. Magnets hold strongest during direct contact; distance nullifies the power. Analyze how quickly the parameters plummet, when the product does not touch directly to the steel surface. When planning the arrangement, eliminate unnecessary gaps.

Table 2: Slippage force (vertical surface)
MW 6x2 / N38

Distance (mm) Friction coefficient Pull Force (kg/lbs/g/N)
0 mm Stal (~0.2) 0.17 kg / 0.38 LBS
172.0 g / 1.7 N
1 mm Stal (~0.2) 0.09 kg / 0.19 LBS
86.0 g / 0.8 N
2 mm Stal (~0.2) 0.03 kg / 0.07 LBS
34.0 g / 0.3 N
3 mm Stal (~0.2) 0.01 kg / 0.03 LBS
12.0 g / 0.1 N
5 mm Stal (~0.2) 0.00 kg / 0.00 LBS
2.0 g / 0.0 N
10 mm Stal (~0.2) 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
15 mm Stal (~0.2) 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
20 mm Stal (~0.2) 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
30 mm Stal (~0.2) 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
50 mm Stal (~0.2) 0.00 kg / 0.00 LBS
0.0 g / 0.0 N
This section presents the approximate holding capacity required to start the slippage of the magnet vertically on a upright metal surface (considering standard friction coefficient). This value varies with the distance between the magnet and the surface.

Table 3: Wall mounting (shearing) - behavior on slippery surfaces
MW 6x2 / N38

Surface type Friction coefficient / % Mocy Max load (kg/lbs/g/N)
Raw steel
µ = 0.3 30% Nominalnej Siły
0.26 kg / 0.57 LBS
258.0 g / 2.5 N
Painted steel (standard)
µ = 0.2 20% Nominalnej Siły
0.17 kg / 0.38 LBS
172.0 g / 1.7 N
Oily/slippery steel
µ = 0.1 10% Nominalnej Siły
0.09 kg / 0.19 LBS
86.0 g / 0.8 N
Magnet with anti-slip rubber
µ = 0.5 50% Nominalnej Siły
0.43 kg / 0.95 LBS
430.0 g / 4.2 N
When mounting a magnet on a upright surface (e.g., a car body), it you can count on barely about 20%-30% of nominal attraction strength. Gravity as well as a low friction coefficient cause that magnets slide down faster than they pull off. Designing a wall mount? Note that the shear force is significantly lower than the perpendicular breakaway force. On a slippery surface, the holder will slip down under a noticeably lighter cargo. Utilizing a rubberized pad can drastically increase the grip.

Table 4: Material efficiency (saturation) - power losses
MW 6x2 / N38

Steel thickness (mm) % power Real pull force (kg/lbs/g/N)
0.5 mm
10%
 0.09 kg / 0.19 LBS
86.0 g / 0.8 N
1 mm
25%
 0.22 kg / 0.47 LBS
215.0 g / 2.1 N
2 mm
50%
 0.43 kg / 0.95 LBS
430.0 g / 4.2 N
3 mm
75%
 0.65 kg / 1.42 LBS
645.0 g / 6.3 N
5 mm
100%
 0.86 kg / 1.90 LBS
860.0 g / 8.4 N
10 mm
100%
 0.86 kg / 1.90 LBS
860.0 g / 8.4 N
11 mm
100%
 0.86 kg / 1.90 LBS
860.0 g / 8.4 N
12 mm
100%
 0.86 kg / 1.90 LBS
860.0 g / 8.4 N
A thin sheet is not enough to conduct the entire magnetic field, which weakens actual performance of the magnet. If you mount a strong magnet to a too thin substrate, the flux will pass right through and the holding will be smaller. To squeeze the maximum of this magnet's power, you need a suitably thick backing of metal. The saturation effect means that on sheet metal structures (e.g., car bodies), the magnet works worse. We advise picking the steel thickness according to the table below.

Table 5: Thermal stability (stability) - resistance threshold
MW 6x2 / N38

Ambient temp. (°C) Power loss Remaining pull (kg/lbs/g/N) Status
20 °C 0.0% 0.86 kg / 1.90 LBS
860.0 g / 8.4 N
 OK
40 °C -2.2% 0.84 kg / 1.85 LBS
841.1 g / 8.3 N
 OK
60 °C -4.4% 0.82 kg / 1.81 LBS
822.2 g / 8.1 N
80 °C -6.6% 0.80 kg / 1.77 LBS
803.2 g / 7.9 N
100 °C -28.8% 0.61 kg / 1.35 LBS
612.3 g / 6.0 N
Classic neodymiums change their properties strength above the temperature limit. Avoid high temperatures – high temperature can irreversibly destroy this product. With every degree above norm, the magnet's force momentarily lowers. Avoid using this product near heat sources higher than its safe range. Exceeding the critical threshold will result in permanent loss of magnetic properties.
*Engineering note: Thermal stability is determined by both grade, but also on the magnet's shape. Low-profile magnets (low permeance coefficient) risk losing magnetic properties at lower temperatures than long magnets. The danger warning in the table indicates permanent field degradation for this particular item.

Table 6: Magnet-Magnet interaction (repulsion) - field range
MW 6x2 / N38

Gap (mm) Attraction (kg/lbs) (N-S) Sliding Force (kg/lbs/g/N) Repulsion (kg/lbs) (N-N)
0 mm 2.05 kg / 4.52 LBS
4 944 Gs
0.31 kg / 0.68 LBS
308 g / 3.0 N
 N/A
1 mm 1.52 kg / 3.34 LBS
5 900 Gs
0.23 kg / 0.50 LBS
228 g / 2.2 N
 1.37 kg / 3.01 LBS
~0 Gs
2 mm 1.02 kg / 2.26 LBS
4 847 Gs
0.15 kg / 0.34 LBS
154 g / 1.5 N
 0.92 kg / 2.03 LBS
~0 Gs
3 mm 0.65 kg / 1.44 LBS
3 869 Gs
0.10 kg / 0.22 LBS
98 g / 1.0 N
 0.59 kg / 1.29 LBS
~0 Gs
5 mm 0.25 kg / 0.54 LBS
2 379 Gs
0.04 kg / 0.08 LBS
37 g / 0.4 N
 0.22 kg / 0.49 LBS
~0 Gs
10 mm 0.03 kg / 0.06 LBS
764 Gs
0.00 kg / 0.01 LBS
4 g / 0.0 N
 0.02 kg / 0.05 LBS
~0 Gs
20 mm 0.00 kg / 0.00 LBS
153 Gs
0.00 kg / 0.00 LBS
0 g / 0.0 N
 0.00 kg / 0.00 LBS
~0 Gs
50 mm 0.00 kg / 0.00 LBS
12 Gs
0.00 kg / 0.00 LBS
0 g / 0.0 N
 0.00 kg / 0.00 LBS
~0 Gs
60 mm 0.00 kg / 0.00 LBS
7 Gs
0.00 kg / 0.00 LBS
0 g / 0.0 N
 0.00 kg / 0.00 LBS
~0 Gs
70 mm 0.00 kg / 0.00 LBS
5 Gs
0.00 kg / 0.00 LBS
0 g / 0.0 N
 0.00 kg / 0.00 LBS
~0 Gs
80 mm 0.00 kg / 0.00 LBS
3 Gs
0.00 kg / 0.00 LBS
0 g / 0.0 N
 0.00 kg / 0.00 LBS
~0 Gs
90 mm 0.00 kg / 0.00 LBS
2 Gs
0.00 kg / 0.00 LBS
0 g / 0.0 N
 0.00 kg / 0.00 LBS
~0 Gs
100 mm 0.00 kg / 0.00 LBS
2 Gs
0.00 kg / 0.00 LBS
0 g / 0.0 N
 0.00 kg / 0.00 LBS
~0 Gs
Two magnetic products interact from a significantly greater distance than a magnet and sheet combination. Such a system of two magnets generates a stronger field and a further horizon of operation. Want to build a powerful holder? Apply two magnets instead of one magnet and a striker plate. Exercise caution that when bringing together two magnets, the impact force is huge. The levitation is slightly lower than the connection force, but still impressive.
*Flux density for N-N configuration reaches ~0 Gs in the exact middle of the gap (caused by magnetic field nullification).
Attention: Estimates apply to sliding force of two matching neodymium magnets (friction coefficient ~0.15 for Ni-Ni layer).

Table 7: Protective zones (implants) - warnings
MW 6x2 / N38

Object / Device Limit (Gauss) / mT Safe distance
Pacemaker 5 Gs (0.5 mT) 3.0 cm
Hearing aid 10 Gs (1.0 mT) 2.5 cm
Mechanical watch 20 Gs (2.0 mT) 2.0 cm
Phone / Smartphone 40 Gs (4.0 mT) 1.5 cm
Car key 50 Gs (5.0 mT) 1.5 cm
Payment card 400 Gs (40.0 mT) 0.5 cm
HDD hard drive 600 Gs (60.0 mT) 0.5 cm
A strong magnetic field poses a serious hazard to electronics as well as pacemakers. These neodymiums produce a field that prevents correct functioning of digital equipment. Be aware: the invisible magnetic field passes through tissues and glass. Exceptional care must be exercised by people with hearing aids and drug dispensers. Also at risk are: automatic timepieces, remotes, membranes, and displays. Avoid contact with magnetic cards, HDD media, or precise measuring instruments.

Table 8: Dynamics (kinetic energy) - collision effects
MW 6x2 / N38

Start from (mm) Speed (km/h) Energy (J) Predicted outcome
10 mm 25.83 km/h
(7.17 m/s)
 0.01 J
30 mm 25.84 km/h
(7.18 m/s)
 0.01 J
50 mm 25.84 km/h
(7.18 m/s)
 0.01 J
100 mm 25.84 km/h
(7.18 m/s)
 0.01 J
NdFeB products are delicate – a violent impact against metal risks their cracking. Control the attraction moment – a neodymium left loose becomes dangerous. Striking energy can cause material chips or painful pinches to fingers. Hold the magnet firmly during mounting so it doesn't slam with momentum against the steel surface. A contact at a velocity of dozens of km/h almost guarantees destruction of the neodymium. Wear safety glasses when playing with large magnets.

Table 9: Coating parameters (durability)
MW 6x2 / N38

Technical parameter Value / Description
Coating type [NiCuNi] Nickel
Layer structure Nickel - Copper - Nickel
Layer thickness 10-20 µm
Salt spray test (SST) ? 24 h
Recommended environment Indoors only (dry)
The SST (salt spray test) is an industry standard for determining coating lifespan in harsh conditions. Improper coating selection is the most common cause of magnet failure over time.

Table 10: Construction data (Flux)
MW 6x2 / N38

Parameter Value SI Unit / Description
Magnetic Flux 1 029 Mx 10.3 µWb
Pc Coefficient 0.44 Low (Flat)
Flux value passing through the magnet pole. Key data for generator designers as well as sensors. The Pc coefficient determines the magnet's operating point.

Table 11: Underwater work (magnet fishing)
MW 6x2 / N38

Environment Effective steel pull Effect
Air (land) 0.86 kg Standard
Water (riverbed) 0.98 kg
(+0.12 kg buoyancy gain)
+14.5%
Rust risk: Remember to wipe the magnet thoroughly after removing it from water and apply a protective layer (e.g., oil) to avoid corrosion.
In water, the magnet feels stronger thanks to Archimedes' principle. However, remember the water resistance when pulling the rope quickly.

1. Wall mount (shear)

*Note: On a vertical wall, the magnet retains just ~20% of its perpendicular strength.

2. Plate thickness effect

*Thin metal sheet (e.g. computer case) severely limits the holding force.

3. Power loss vs temp

*For N38 grade, the critical limit is 80°C.

4. Demagnetization curve and operating point (B-H)

chart generated for the permeance coefficient Pc (Permeance Coefficient) = 0.44

The chart above illustrates the magnetic characteristics of the material within the second quadrant of the hysteresis loop. The solid red line represents the demagnetization curve (material potential), while the dashed blue line is the load line based on the magnet's geometry. The Pc (Permeance Coefficient), also known as the load line slope, is a dimensionless value that describes the relationship between the magnet's shape and its magnetic stability. The intersection of these two lines (the black dot) is the operating point — it determines the actual magnetic flux density generated by the magnet in this specific configuration. A higher Pc value means the magnet is more 'slender' (tall relative to its area), resulting in a higher operating point and better resistance to irreversible demagnetization caused by external fields or temperature. A value of 0.42 is relatively low (typical for flat magnets), meaning the operating point is closer to the 'knee' of the curve — caution is advised when operating at temperatures near the maximum limit to avoid strength loss.

Technical specification and ecology

Chemical composition

iron (Fe) 64% – 68%
neodymium (Nd) 29% – 32%
boron (B) 1.1% – 1.2%
dysprosium (Dy) 0.5% – 2.0%
coating (Ni-Cu-Ni) < 0.05%

Sustainability

recyclability (EoL) 100%
recycled raw materials ~10% (pre-cons)
carbon footprint low / zredukowany
waste code (EWC) 16 02 16
Safety card (GPSR)
responsible entity
Dhit sp. z o.o.
ul. Kościuszki 6A, 05-850 Ożarów Mazowiecki
tel: +48 22 499 98 98 | e-mail: bok@dhit.pl
batch number/type
id: 010092-2026
Measurement Calculator

Magnet pull force

Magnetic Induction

Input a value in one of the inputs, to see the rest will recalculate instantly.

Other products

KM HF - 22 kg - magnetic bracket
Product available Ships today (order by 14:00)

KM HF - 22 kg - magnetic bracket

29.52 zł brutto / pcs
MW 8x4 / N38 - cylindrical magnet
Product available Ships today (order by 14:00)

MW 8x4 / N38 - cylindrical magnet

0.701 zł brutto / pcs
MPL 20x8x6 / N38 - lamellar magnet
Product available Ships today (order by 14:00)

MPL 20x8x6 / N38 - lamellar magnet

5.17 zł brutto / pcs
UMGGW 34x8 [M4] GW / N38 - magnetic holder rubber internal thread
Product available Ships today (order by 14:00)

UMGGW 34x8 [M4] GW / N38 - magnetic holder rubber internal thread

9.84 zł brutto / pcs
This product is an extremely powerful cylindrical magnet, composed of advanced NdFeB material, which, at dimensions of Ø6x2 mm, guarantees maximum efficiency. This specific item boasts high dimensional repeatability and industrial build quality, making it a perfect solution for the most demanding engineers and designers. As a cylindrical magnet with significant force (approx. 0.86 kg), this product is available off-the-shelf from our European logistics center, ensuring rapid order fulfillment. Furthermore, its triple-layer Ni-Cu-Ni coating shields it against corrosion in typical operating conditions, ensuring an aesthetic appearance and durability for years.
This model is created for building generators, advanced sensors, and efficient magnetic separators, where maximum induction on a small surface counts. Thanks to the high power of 8.43 N with a weight of only 0.42 g, this cylindrical magnet is indispensable in miniature devices and wherever every gram matters.
Since our magnets have a very precise dimensions, the best method is to glue them into holes with a slightly larger diameter (e.g., 6.1 mm) using epoxy glues. To ensure long-term durability in industry, specialized industrial adhesives are used, which are safe for nickel and fill the gap, guaranteeing durability of the connection.
Magnets NdFeB grade N38 are suitable for 90% of applications in modeling and machine building, where extreme miniaturization with maximum force is not required. If you need even stronger magnets in the same volume (Ø6x2), contact us regarding higher grades (e.g., N50, N52), however, N38 is the standard in continuous sale in our warehouse.
The presented product is a neodymium magnet with precisely defined parameters: diameter 6 mm and height 2 mm. The key parameter here is the holding force amounting to approximately 0.86 kg (force ~8.43 N), which, with such defined dimensions, proves the high grade of the NdFeB material. The product has a [NiCuNi] coating, which secures it against oxidation, giving it an aesthetic, silvery shine.
Standardly, the magnetic axis runs through the center of the cylinder, causing the greatest attraction force to occur on the bases with a diameter of 6 mm. Such an arrangement is standard when connecting magnets in stacks (e.g., in filters) or when mounting in sockets at the bottom of a hole. On request, we can also produce versions magnetized diametrically if your project requires it.

Strengths and weaknesses of Nd2Fe14B magnets.

Benefits

Besides their exceptional field intensity, neodymium magnets offer the following advantages:
  • They have unchanged lifting capacity, and over around 10 years their attraction force decreases symbolically – ~1% (in testing),
  • Neodymium magnets prove to be remarkably resistant to loss of magnetic properties caused by external magnetic fields,
  • In other words, due to the shiny finish of silver, the element is aesthetically pleasing,
  • The surface of neodymium magnets generates a concentrated magnetic field – this is a key feature,
  • Thanks to resistance to high temperature, they are capable of working (depending on the form) even at temperatures up to 230°C and higher...
  • Possibility of precise modeling as well as adapting to complex conditions,
  • Wide application in advanced technology sectors – they are commonly used in computer drives, electric motors, medical devices, also multitasking production systems.
  • Compactness – despite small sizes they provide effective action, making them ideal for precision applications

Limitations

Disadvantages of NdFeB magnets:
  • To avoid cracks upon strong impacts, we recommend using special steel holders. Such a solution protects the magnet and simultaneously improves its durability.
  • Neodymium magnets demagnetize when exposed to high temperatures. After reaching 80°C, many of them experience permanent drop of power (a factor is the shape as well as dimensions of the magnet). We offer magnets specially adapted to work at temperatures up to 230°C marked [AH], which are very resistant to heat
  • They rust in a humid environment. For use outdoors we suggest using waterproof magnets e.g. in rubber, plastic
  • We suggest a housing - magnetic mount, due to difficulties in creating nuts inside the magnet and complex forms.
  • Potential hazard resulting from small fragments of magnets are risky, in case of ingestion, which is particularly important in the context of child safety. Furthermore, small components of these devices are able to disrupt the diagnostic process medical in case of swallowing.
  • With budget limitations the cost of neodymium magnets is economically unviable,

Holding force characteristics

Highest magnetic holding force – what it depends on?

The specified lifting capacity concerns the peak performance, recorded under optimal environment, specifically:
  • using a base made of mild steel, functioning as a circuit closing element
  • with a thickness no less than 10 mm
  • characterized by smoothness
  • under conditions of gap-free contact (surface-to-surface)
  • under vertical force vector (90-degree angle)
  • at temperature room level

Practical lifting capacity: influencing factors

During everyday use, the actual holding force results from many variables, presented from the most important:
  • Air gap (betwixt the magnet and the metal), because even a very small clearance (e.g. 0.5 mm) leads to a decrease in force by up to 50% (this also applies to varnish, rust or debris).
  • Force direction – declared lifting capacity refers to detachment vertically. When slipping, the magnet holds much less (typically approx. 20-30% of nominal force).
  • Wall thickness – thin material does not allow full use of the magnet. Part of the magnetic field passes through the material instead of generating force.
  • Chemical composition of the base – low-carbon steel gives the best results. Alloy admixtures lower magnetic properties and holding force.
  • Surface condition – ground elements ensure maximum contact, which increases force. Rough surfaces weaken the grip.
  • Thermal conditions – neodymium magnets have a negative temperature coefficient. At higher temperatures they lose power, and at low temperatures gain strength (up to a certain limit).

Holding force was measured on a smooth steel plate of 20 mm thickness, when a perpendicular force was applied, however under attempts to slide the magnet the load capacity is reduced by as much as fivefold. In addition, even a slight gap between the magnet and the plate reduces the lifting capacity.

Precautions when working with neodymium magnets
Threat to navigation

Navigation devices and smartphones are extremely sensitive to magnetism. Direct contact with a powerful NdFeB magnet can ruin the sensors in your phone.

Keep away from computers

Very strong magnetic fields can corrupt files on payment cards, hard drives, and storage devices. Stay away of at least 10 cm.

Protective goggles

NdFeB magnets are ceramic materials, meaning they are prone to chipping. Collision of two magnets leads to them breaking into small pieces.

Allergic reactions

Certain individuals have a sensitization to Ni, which is the standard coating for NdFeB magnets. Frequent touching might lead to skin redness. We suggest wear protective gloves.

This is not a toy

These products are not intended for children. Swallowing several magnets can lead to them connecting inside the digestive tract, which constitutes a direct threat to life and requires immediate surgery.

Life threat

Life threat: Strong magnets can turn off pacemakers and defibrillators. Do not approach if you have medical devices.

Dust is flammable

Fire warning: Rare earth powder is highly flammable. Do not process magnets in home conditions as this may cause fire.

Crushing force

Risk of injury: The attraction force is so great that it can cause blood blisters, pinching, and broken bones. Protective gloves are recommended.

Do not overheat magnets

Regular neodymium magnets (N-type) undergo demagnetization when the temperature goes above 80°C. The loss of strength is permanent.

Do not underestimate power

Before use, check safety instructions. Uncontrolled attraction can break the magnet or injure your hand. Think ahead.

Safety First! Learn more about hazards in the article: Magnet Safety Guide.