Car magnetizers are devices that use magnetic phenomena to improve the properties of oils, fuels, and water. Additionally, by thoroughly cleaning the interior of the installation from ferromagnetic materials, they protect against the formation of deposits, e.g., the appearance of scale in boilers. Having a significant influence on the arrangement of magnetic dipoles in the fluid installation, magnetizers "order" the occurrence of turbulence, which can significantly change its properties. It is recommended to install them near filters, which allows regular cleaning of the places where they are installed. By using modern magnetizers with built-in powerful neodymium magnets in fuel systems, we can influence the regular arrangement of magnetic dipoles, which guarantees much more efficient combustion.
The phenomenon of magnetizer was discovered by the Germans during World War II - a significant reduction in fuel consumption was observed when transporting magnetic rods by airplanes. In those days, neodymium magnets were not known, and the magnetizers of that time were gigantic in size (similar to calculating machines). The inventions of the last 20 years have made them ten times smaller while maintaining the same power.
Turbomag® Magnetizers XT series - pure savings.
Currently, we produce overlay magnetizers, and the whole of our research found its implementation in the product series codenamed Turbomag® XT. Turbomag® is a legally protected trademark reserved Z-303759 in the Polish Patent Office.
Remember! Our magnetizers work on fuel, not on the engine. That is why there is no division into engine capacity. The fuel for a small car is the same as for a large one, so the magnetizer will be the same.
We recommend installing magnetizers on filters. However, if this is not possible, they can be optionally mounted on fuel supply lines. It doesn't matter if it's 5.5 cm from the injector rail or 20 cm. The ionization process will still occur, and its effect is not fleeting.
* Each magnetizer includes two clamps with magnetic lenses and two magnets Turbomag® magnetizers from the XT-5 and XT-6 series, which are intended for passenger cars, have been tested on racetracks in Poland. We decided to perform such extreme tests in order to guarantee our customers a product that provides 100% satisfaction.
Magnetic Water Softeners Turbomag® XT-4
Magnetic water softeners consist of two strong magnets placed on opposite sides of the pipe. When hard water passes through a strong magnetic field, small CaCO3 crystals are formed, which are washed away with the flow of water. Crystals treated in this way do not settle on pipes or electrical devices and do not form deposits. Magnetic water treatment also reduces the concentration of minerals dissolved in water, which will dissolve existing scale earlier.
Magnetic water treatment has several advantages over conventional water softeners:
- easy installation (just place the magnet on the pipe)
- no operating costs (no need to replace inserts like in chemical softeners, zero electricity consumption)
- magnets do not come into contact with water, and there is no hygiene risk
- magnetic softeners do not remove calcium from water or add chemicals to it
- magnetic softeners are much cheaper
Unlike chemical descalers, magnetic water softeners do not change the mineral composition of the water. Because calcium and magnesium cations remain in the water, magnetic water treatment cannot completely prevent the formation of scale, but only significantly reduce it.
Magnetic treatment of drinking water (i.e., cold water) is not necessary because in cold water (or only in exceptional cases) there is no scale formation. Therefore, at home, it is sufficient to place a softener on the section of the pipe that leads to the boiler, water heater, washing machine, or other equipment that needs to be protected from scale formation.
The effectiveness of magnetic water treatment depends on many factors, including the composition of the water, the type and condition of water pipes, the water temperature, and other external factors, so results cannot be guaranteed.
Our Turbomag® car magnetyzers from the XT-5 and XT-6 series are specifically designed for passenger vehicles and have undergone rigorous testing on racetracks in Poland. This allows us to guarantee our customers a product that ensures 100% satisfaction.
We recommend installing the magnetyzers on filters, but if that is not possible, they can alternatively be mounted on fuel lines. Whether it is 5.5 cm from the fuel rail or 20 cm, the ionization process will occur, and its effect will not dissipate.
Please note that our magnetyzers work on fuel, not on the engine. Therefore, there is no differentiation based on engine capacity. The fuel for a small car is the same as for a large car, so the magnetyzer will be the same.
The company offers three models of Turbomag® magnetyzers: XT-4 for central heating and domestic water, XT-5 for diesel, and XT-6 for gasoline and LPG. All models are designed for passenger vehicles and have been tested on racetracks in Poland, ensuring high quality and effectiveness.
It is recommended to install the magnetyzers on filters, but if that is not possible, they can be mounted on fuel lines. The distance from the fuel rail is not crucial because the ionization process will occur regardless, and its effect is long-lasting.
Remember that magnetyzers work on fuel, not the engine, so there's no need to purchase different models based on engine capacity. Each Turbomag® magnetyzer model includes two clamps with magnetic lenses and two magnets.
If you want to increase the efficiency of your car and ensure its cleanliness, it's worth considering the purchase of a Turbomag® magnetyzer. With it, your car will operate more efficiently, and you'll save on fuel costs and maintenance expenses.