Product available Ships today (order by 14:00) CO2 GPSR PPWR REACH

MPL 5x5x5 / N38 - lamellar magnet

lamellar magnet

Catalog no 020594

GTIN/EAN: 5906301815884

Load capacity 0.96 kg / 9.41 N Magnetic Induction 539.30 mT / 5393 Gs
length
5 mm [±0,1 mm]
Width
5 mm [±0,1 mm]
Height
5 mm [±0,1 mm]
Weight
0.94 g
Magnetization Direction
↑ axial
Coating
[NiCuNi] Nickel

How we measure these parameters — certificates and measurements

0.550 zł net / pcs

0.677 zł with VAT (23% VAT) / pcs

price for transport

bulk discounts:

Need more?

Quantity
Net
Gross
price from 1 pcs
0.550 zł
0.677 zł
price from 1100 pcs
0.517 zł
0.636 zł
price from 4600 pcs
0.484 zł
0.595 zł

Frequently asked questions

What pull rating should I choose for a workshop block magnet?
A catalogue pull rating is measured under stated test conditions. A painted or thin steel surface, a gap or a load acting along the surface can reduce the practical grip. Choose a margin based on the actual installation and read the product card.
Are block neodymium magnets available in more durable versions?
Sintered NdFeB is brittle and can corrode if its coating is damaged. Check the coating and operating-temperature limit of the selected product. A housing may help protect a magnet in an application exposed to impacts.
How should I choose block magnets for mounting a structure?
First check the steel grade and thickness, then any gap created by paint or dirt, and finally the direction of the applied load. Compare these conditions with the specifications of the selected magnet; do not rely on grade alone.

Engineering report for this magnet

Full PDF analysis: pull and shear force, effect of distance, temperature and plate thickness, safety distances and the demagnetization curve.

Want to talk magnets?

Call us now +48 888 99 98 98 alternatively let us know using contact form the contact section.
Specifications and structure of a neodymium magnet can be estimated using our power calculator.

Order by 14:00 and we’ll ship today!

Technical specification - MPL 5x5x5 / N38 - lamellar magnet

Specification / characteristics - MPL 5x5x5 / N38 - lamellar magnet

properties
properties values
Cat. no. 020594
GTIN/EAN 5906301815884
Distributor Dhit sp. z o.o.
Country of origin Poland / China / Germany
Customs code 85059029
length 5 mm [±0,1 mm]
Width 5 mm [±0,1 mm]
Height 5 mm [±0,1 mm]
Weight 0.94 g
Magnetization Direction ↑ axial
Load capacity ~ ? 0.96 kg / 9.41 N
Magnetic Induction ~ ? 539.30 mT / 5393 Gs
Coating [NiCuNi] Nickel
Manufacturing Tolerance ±0.1 mm

Magnetic properties of material N38

Specification / characteristics MPL 5x5x5 / N38 - lamellar magnet
properties values units
Remanence Br ? 12.2-12.6 kGs
Remanence Br ? 1220-1260 mT
Coercivity bHc ? 10.8-11.5 kOe
Coercivity bHc ? 860-915 kA/m
Intrinsic coercivity iHc ≥ 12 kOe
Intrinsic coercivity iHc ≥ 955 kA/m
Energy product BHmax ? 36-38 BH max MGOe
Energy product BHmax ? 287-303 BH max KJ/m
Maximum working temperature ? ≤ 80 °C

Physical properties of sintered neodymium magnets Nd2Fe14B at 20°C

Physical properties of sintered neodymium magnets Nd2Fe14B at 20°C
properties values units
Vickers hardness ≥550 Hv
Density ≥7.4 g/cm3
Curie Temperature TC 310 °C
Curie Temperature TF 590 °F
Specific resistance 150 μΩ⋅cm
Bending strength 250 MPa
Compressive strength 1000~1100 MPa
Thermal expansion parallel (∥) to orientation (M) (3-4) x 10-6 °C-1
Thermal expansion perpendicular (⊥) to orientation (M) -(1-3) x 10-6 °C-1
Young's modulus 1.7 x 104 kg/mm²

Physical simulation of the assembly - data

The following information constitute the outcome of a engineering calculation. Values were calculated on algorithms for the material Nd2Fe14B. Real-world conditions may differ. Please consider these calculations as a reference point during assembly planning.

Table 1: Static force (pull vs gap) - characteristics
MPL 5x5x5 / N38

Distance (mm) Induction (Gauss) / mT Pull Force (kg/lbs/g/N) Risk Status
0 mm 5385 Gs
538.5 mT
0.96 kg / 2.12 pounds
960.0 g / 9.4 N
safe
1 mm 3516 Gs
351.6 mT
0.41 kg / 0.90 pounds
409.3 g / 4.0 N
safe
2 mm 2141 Gs
214.1 mT
0.15 kg / 0.33 pounds
151.7 g / 1.5 N
safe
3 mm 1315 Gs
131.5 mT
0.06 kg / 0.13 pounds
57.2 g / 0.6 N
safe
5 mm 562 Gs
56.2 mT
0.01 kg / 0.02 pounds
10.5 g / 0.1 N
safe
10 mm 126 Gs
12.6 mT
0.00 kg / 0.00 pounds
0.5 g / 0.0 N
safe
15 mm 46 Gs
4.6 mT
0.00 kg / 0.00 pounds
0.1 g / 0.0 N
safe
20 mm 22 Gs
2.2 mT
0.00 kg / 0.00 pounds
0.0 g / 0.0 N
safe
30 mm 7 Gs
0.7 mT
0.00 kg / 0.00 pounds
0.0 g / 0.0 N
safe
50 mm 2 Gs
0.2 mT
0.00 kg / 0.00 pounds
0.0 g / 0.0 N
safe

Table 2: Sliding hold (vertical surface)
MPL 5x5x5 / N38

Distance (mm) Friction coefficient Pull Force (kg/lbs/g/N)
0 mm Raw steel (µ ≈ 0.2) 0.19 kg / 0.42 pounds
192.0 g / 1.9 N
1 mm Raw steel (µ ≈ 0.2) 0.08 kg / 0.18 pounds
82.0 g / 0.8 N
2 mm Raw steel (µ ≈ 0.2) 0.03 kg / 0.07 pounds
30.0 g / 0.3 N
3 mm Raw steel (µ ≈ 0.2) 0.01 kg / 0.03 pounds
12.0 g / 0.1 N
5 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 pounds
2.0 g / 0.0 N
10 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 pounds
0.0 g / 0.0 N
15 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 pounds
0.0 g / 0.0 N
20 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 pounds
0.0 g / 0.0 N
30 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 pounds
0.0 g / 0.0 N
50 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 pounds
0.0 g / 0.0 N

Table 3: Vertical assembly (shearing) - vertical pull
MPL 5x5x5 / N38

Surface type Friction coefficient / % Max load (kg/lbs/g/N)
Raw steel
µ = 0.3 30% of nominal force
0.29 kg / 0.63 pounds
288.0 g / 2.8 N
Painted steel (standard)
µ = 0.2 20% of nominal force
0.19 kg / 0.42 pounds
192.0 g / 1.9 N
Oily/slippery steel
µ = 0.1 10% of nominal force
0.10 kg / 0.21 pounds
96.0 g / 0.9 N
Magnet with anti-slip rubber
µ = 0.5 50% of nominal force
0.48 kg / 1.06 pounds
480.0 g / 4.7 N

Table 4: Material efficiency (substrate influence) - sheet metal selection
MPL 5x5x5 / N38

Steel thickness (mm) % power Real pull force (kg/lbs/g/N)
0.5 mm
10%
0.10 kg / 0.21 pounds
96.0 g / 0.9 N
1 mm
25%
0.24 kg / 0.53 pounds
240.0 g / 2.4 N
2 mm
50%
0.48 kg / 1.06 pounds
480.0 g / 4.7 N
3 mm
75%
0.72 kg / 1.59 pounds
720.0 g / 7.1 N
5 mm
100%
0.96 kg / 2.12 pounds
960.0 g / 9.4 N
10 mm
100%
0.96 kg / 2.12 pounds
960.0 g / 9.4 N
11 mm
100%
0.96 kg / 2.12 pounds
960.0 g / 9.4 N
12 mm
100%
0.96 kg / 2.12 pounds
960.0 g / 9.4 N

Table 5: Working in heat (material behavior) - power drop
MPL 5x5x5 / N38

Magnet temperature (°C) Force change relative to 20°C Remaining pull (kg/lbs/g/N) Status
20 °C 0.0% 0.96 kg / 2.12 pounds
960.0 g / 9.4 N
Estimate
40 °C -4.4% 0.92 kg / 2.02 pounds
918.2 g / 9.0 N
Estimate
60 °C -8.6% 0.88 kg / 1.93 pounds
877.4 g / 8.6 N
Estimate
80 °C -12.8% 0.84 kg / 1.85 pounds
837.5 g / 8.2 N
Material limit
100 °C — — Out of range — no model

Table 6: Two magnets (repulsion) - field range
MPL 5x5x5 / N38

Gap (mm) Attraction (kg/lbs) (N-S) Shear Strength (kg/lbs/g/N) Repulsion (kg/lbs) (N-N)
0 mm 4.47 kg / 9.86 pounds
5 946 Gs
0.67 kg / 1.48 pounds
671 g / 6.6 N
N/A
1 mm 3.01 kg / 6.65 pounds
8 845 Gs
0.45 kg / 1.00 pounds
452 g / 4.4 N
2.71 kg / 5.98 pounds
~0 Gs
2 mm 1.91 kg / 4.20 pounds
7 033 Gs
0.29 kg / 0.63 pounds
286 g / 2.8 N
1.72 kg / 3.78 pounds
~0 Gs
3 mm 1.17 kg / 2.57 pounds
5 501 Gs
0.17 kg / 0.39 pounds
175 g / 1.7 N
1.05 kg / 2.31 pounds
~0 Gs
5 mm 0.43 kg / 0.95 pounds
3 343 Gs
0.06 kg / 0.14 pounds
65 g / 0.6 N
0.39 kg / 0.85 pounds
~0 Gs
10 mm 0.05 kg / 0.11 pounds
1 125 Gs
0.01 kg / 0.02 pounds
7 g / 0.1 N
0.04 kg / 0.10 pounds
~0 Gs
20 mm 0.00 kg / 0.01 pounds
251 Gs
0.00 kg / 0.00 pounds
0 g / 0.0 N
0.00 kg / 0.00 pounds
~0 Gs
50 mm 0.00 kg / 0.00 pounds
24 Gs
0.00 kg / 0.00 pounds
0 g / 0.0 N
0.00 kg / 0.00 pounds
~0 Gs
60 mm 0.00 kg / 0.00 pounds
14 Gs
0.00 kg / 0.00 pounds
0 g / 0.0 N
0.00 kg / 0.00 pounds
~0 Gs
70 mm 0.00 kg / 0.00 pounds
9 Gs
0.00 kg / 0.00 pounds
0 g / 0.0 N
0.00 kg / 0.00 pounds
~0 Gs
80 mm 0.00 kg / 0.00 pounds
6 Gs
0.00 kg / 0.00 pounds
0 g / 0.0 N
0.00 kg / 0.00 pounds
~0 Gs
90 mm 0.00 kg / 0.00 pounds
5 Gs
0.00 kg / 0.00 pounds
0 g / 0.0 N
0.00 kg / 0.00 pounds
~0 Gs
100 mm 0.00 kg / 0.00 pounds
3 Gs
0.00 kg / 0.00 pounds
0 g / 0.0 N
0.00 kg / 0.00 pounds
~0 Gs

Table 7: Axial field levels — not safety zones
MPL 5x5x5 / N38

Field level (Gs) mT Model distance (cm)
< 5 Gs < 0.5 mT 3.5 cm
< 10 Gs < 1.0 mT 3.0 cm
< 20 Gs < 2.0 mT 2.5 cm
< 40 Gs < 4.0 mT 2.0 cm
< 50 Gs < 5.0 mT 1.5 cm
< 400 Gs < 40.0 mT 1.0 cm
< 600 Gs < 60.0 mT 0.5 cm

Table 8: Dynamics (kinetic energy) - collision effects
MPL 5x5x5 / N38

Start from (mm) Speed (km/h) Energy (J) Predicted outcome
10 mm 17.15 km/h
(4.76 m/s)
0.01 J
30 mm 17.16 km/h
(4.77 m/s)
0.01 J
50 mm 17.16 km/h
(4.77 m/s)
0.01 J
100 mm 17.16 km/h
(4.77 m/s)
0.01 J

Table 9: Anti-corrosion coating durability
MPL 5x5x5 / N38

Technical parameter Value / Description
Coating type [NiCuNi] Nickel
Layer structure Nickel - Copper - Nickel
Layer thickness 10-20 µm
Salt spray test (SST) ? 24 h
Recommended environment Indoors only (dry)

Table 10: Construction data (Flux)
MPL 5x5x5 / N38

Parameter Value SI Unit / Description
Magnetic Flux 1 376 Mx 13.8 µWb
Pc Coefficient 0.84 High (Stable)

Table 11: Physics of underwater searching
MPL 5x5x5 / N38

Environment Effective steel pull Effect
Air (land) 0.96 kg Standard
Water (riverbed) 1.10 kg
(+0.14 kg buoyancy gain)
+14.5%
Corrosion warning: Standard nickel requires drying after every contact with moisture; lack of maintenance will lead to rust spots.

1. Wall mount (shear)

*Caution: On a vertical wall, the magnet retains only ~20% of its nominal pull.

2. Efficiency vs thickness

*Thin metal sheet (e.g. computer case) significantly limits the holding force.

3. Thermal stability

N38: the maximum material working temperature is 80°C. Permitted conditions also depend on the shape and magnetic circuit.

4. Demagnetization curve and operating point (B-H)

chart generated for the permeance coefficient Pc (Permeance Coefficient) = 0.84

This simulation demonstrates the magnetic stability of the selected magnet under specific geometric conditions. The solid red line represents the demagnetization curve (material potential), while the dashed blue line is the load line based on the magnet's geometry. The Pc (Permeance Coefficient), also known as the load line slope, is a dimensionless value that describes the relationship between the magnet's shape and its magnetic stability. The intersection of these two lines (the black dot) is the operating point — it determines the actual magnetic flux density generated by the magnet in this specific configuration. A higher Pc value means the magnet is more 'slender' (tall relative to its area), resulting in a higher operating point and better resistance to irreversible demagnetization caused by external fields or temperature. At low Pc values (typical for flat magnets, below about 1) the operating point is closer to the 'knee' of the curve — caution is advised when operating at temperatures near the maximum limit to avoid strength loss.

Technical and environmental data

Chemical composition

iron (Fe) 64% – 68%
neodymium (Nd) 29% – 32%
boron (B) 1.1% – 1.2%
dysprosium (Dy) 0.5% – 2.0%
coating (Ni-Cu-Ni) < 0.05%

Sustainability

recyclability (EoL) 100%
recycled raw materials ~10% (pre-cons)
carbon footprint low / zredukowany
waste code (EWC) 16 02 16
Safety card (GPSR)
responsible entity
Dhit sp. z o.o.
ul. Kościuszki 6A, 05-850 Ożarów Mazowiecki
tel: +48 22 499 98 98 | e-mail: bok@dhit.pl
batch number/type
id: 020594-2026
Magnet Unit Converter

Magnet pull force


Field Strength

Other deals

This product is a very powerful plate magnet made of NdFeB material, which, with dimensions of 5x5x5 mm and a weight of 0.94 g, guarantees premium class connection. This magnetic block with a force of 9.41 N is ready for shipment in 24h, allowing for rapid realization of your project. The durable anti-corrosion layer ensures a long lifespan in a dry environment, protecting the core from oxidation.
Separating block magnets requires a technique based on sliding (moving one relative to the other), rather than forceful pulling apart. Watch your fingers! Magnets with a force of 0.96 kg can pinch very hard and cause hematomas. Using a screwdriver risks destroying the coating and permanently cracking the magnet.
Plate magnets MPL 5x5x5 / N38 are the foundation for many industrial devices, such as filters catching filings and linear motors. Thanks to the flat surface and high force (approx. 0.96 kg), they are ideal as hidden locks in furniture making and mounting elements in automation. Customers often choose this model for workshop organization on strips and for advanced DIY and modeling projects, where precision and power count.
Cyanoacrylate glues (super glue type) are good only for small magnets; for larger plates, we recommend resins. Double-sided tape cushions vibrations, which is an advantage when mounting in moving elements. Avoid chemically aggressive glues or hot glue, which can demagnetize neodymium (above 80°C).
The magnetic axis runs through the shortest dimension, which is typical for gripper magnets. Thanks to this, it works best when "sticking" to sheet metal or another magnet with a large surface area. Such a pole arrangement ensures maximum holding capacity when pressing against the sheet, creating a closed magnetic circuit.
This model is characterized by dimensions 5x5x5 mm, which, at a weight of 0.94 g, makes it an element with high energy density. The key parameter here is the lifting capacity amounting to approximately 0.96 kg (force ~9.41 N), which, with such a flat shape, proves the high power of the material. The protective [NiCuNi] coating secures the magnet against corrosion.

Strengths and weaknesses of neodymium magnets.

Pros

Apart from their superior power, neodymium magnets have these key benefits:
  • Their power remains stable, and after approximately 10 years it decreases only by ~1% (according to research),
  • They are resistant to demagnetization induced by external magnetic fields,
  • Thanks to the metallic finish, the surface of nickel, gold, or silver-plated gives an modern appearance,
  • Magnetic induction on the working part of the magnet turns out to be exceptional,
  • Through (appropriate) combination of ingredients, they can achieve high thermal strength, enabling functioning at temperatures reaching 230°C and above...
  • Thanks to modularity in constructing and the capacity to modify to unusual requirements,
  • Versatile presence in high-tech industry – they are utilized in computer drives, electric motors, advanced medical instruments, and complex engineering applications.
  • Relatively small size with high pulling force – neodymium magnets offer impressive pulling force in tiny dimensions, which makes them useful in compact constructions

Cons

Cons of neodymium magnets: application proposals
  • They are prone to damage upon heavy impacts. To avoid cracks, it is worth securing magnets in a protective case. Such protection not only protects the magnet but also increases its resistance to damage
  • Do not exceed this material temperature limit: 80°C. Overheating may permanently weaken the magnet.
  • They oxidize in a humid environment - during use outdoors we recommend using waterproof magnets e.g. in rubber, plastic
  • We recommend cover - magnetic mount, due to difficulties in producing threads inside the magnet and complex shapes.
  • Health risk resulting from small fragments of magnets can be dangerous, if swallowed, which is particularly important in the context of child health protection. It is also worth noting that small components of these devices can complicate diagnosis medical when they are in the body.
  • With budget limitations the cost of neodymium magnets can be a barrier,

Lifting parameters

Maximum lifting force for a neodymium magnet – what it depends on?

Magnet power was determined for the most favorable conditions, taking into account:
  • with the application of a sheet made of special test steel, guaranteeing full magnetic saturation
  • whose transverse dimension is min. 10 mm
  • characterized by smoothness
  • with zero gap (no impurities)
  • during detachment in a direction perpendicular to the mounting surface
  • at standard ambient temperature

Key elements affecting lifting force

It is worth knowing that the working load will differ subject to elements below, starting with the most relevant:
  • Gap between surfaces – every millimeter of distance (caused e.g. by varnish or dirt) drastically reduces the magnet efficiency, often by half at just 0.5 mm.
  • Load vector – highest force is available only during perpendicular pulling. The resistance to sliding of the magnet along the surface is usually several times lower (approx. 1/5 of the lifting capacity).
  • Base massiveness – insufficiently thick steel does not accept the full field, causing part of the flux to be escaped to the other side.
  • Metal type – different alloys attracts identically. High carbon content weaken the attraction effect.
  • Surface quality – the smoother and more polished the surface, the better the adhesion and higher the lifting capacity. Roughness creates an air distance.
  • Operating temperature – neodymium magnets have a sensitivity to temperature. At higher temperatures they lose power, and in frost they can be stronger (up to a certain limit).

Lifting capacity was measured by applying a polished steel plate of optimal thickness (min. 20 mm), under vertically applied force, whereas under shearing force the holding force is lower. Additionally, even a slight gap between the magnet’s surface and the plate lowers the load capacity.

Safety rules for work with NdFeB magnets
Flammability

Fire warning: Neodymium dust is explosive. Avoid machining magnets in home conditions as this may cause fire.

Health Danger

Warning for patients: Strong magnetic fields disrupt medical devices. Keep at least 30 cm distance or ask another person to work with the magnets.

Magnetic media

Avoid bringing magnets close to a purse, laptop, or screen. The magnetic field can permanently damage these devices and erase data from cards.

Avoid contact if allergic

Warning for allergy sufferers: The nickel-copper-nickel coating consists of nickel. If skin irritation happens, immediately stop working with magnets and use protective gear.

Risk of cracking

NdFeB magnets are sintered ceramics, which means they are fragile like glass. Clashing of two magnets will cause them cracking into shards.

GPS and phone interference

A strong magnetic field interferes with the functioning of compasses in phones and navigation systems. Maintain magnets close to a device to avoid breaking the sensors.

Do not overheat magnets

Do not exceed the maximum operating temperature stated in the specifications of the particular product. The limit depends on the material, geometry and operating arrangement; there is no single threshold for all neodymium magnets. Overheating can permanently weaken a magnet.

Crushing force

Protect your hands. Two large magnets will join immediately with a force of massive weight, crushing anything in their path. Exercise extreme caution!

Handling guide

Handle magnets with awareness. Their huge power can shock even professionals. Plan your moves and respect their force.

Keep away from children

Always store magnets away from children. Risk of swallowing is high, and the effects of magnets connecting inside the body are fatal.

Danger! Learn more about risks in the article: Magnet Safety Guide.