Product available Ships today (order by 14:00) CO2 GPSR PPWR REACH

MPL 15x4x1.5 / N38 - lamellar magnet

lamellar magnet

Catalog no 020599

GTIN/EAN: 5906301816096

Load capacity 1.39 kg / 13.63 N Magnetic Induction 263.60 mT / 2636 Gs
length
15 mm [±0,1 mm]
Width
4 mm [±0,1 mm]
Height
1.5 mm [±0,1 mm]
Weight
0.68 g
Magnetization Direction
↑ axial
Coating
[NiCuNi] Nickel

How we measure these parameters — certificates and measurements

0.400 zł net / pcs

0.492 zł with VAT (23% VAT) / pcs

price for transport

bulk discounts:

Need more?

Quantity
Net
Gross
price from 1 pcs
0.400 zł
0.492 zł
price from 1500 pcs
0.376 zł
0.462 zł
price from 6300 pcs
0.352 zł
0.433 zł

Frequently asked questions

What pull rating should I choose for a workshop block magnet?
A catalogue pull rating is measured under stated test conditions. A painted or thin steel surface, a gap or a load acting along the surface can reduce the practical grip. Choose a margin based on the actual installation and read the product card.
Are block neodymium magnets available in more durable versions?
Sintered NdFeB is brittle and can corrode if its coating is damaged. Check the coating and operating-temperature limit of the selected product. A housing may help protect a magnet in an application exposed to impacts.
How should I choose block magnets for mounting a structure?
First check the steel grade and thickness, then any gap created by paint or dirt, and finally the direction of the applied load. Compare these conditions with the specifications of the selected magnet; do not rely on grade alone.

Engineering report for this magnet

Full PDF analysis: pull and shear force, effect of distance, temperature and plate thickness, safety distances and the demagnetization curve.

Want to talk magnets?

Call us now +48 888 99 98 98 alternatively let us know using contact form the contact section.
Specifications and structure of a neodymium magnet can be estimated using our power calculator.

Order by 14:00 and we’ll ship today!

Technical details - MPL 15x4x1.5 / N38 - lamellar magnet

Specification / characteristics - MPL 15x4x1.5 / N38 - lamellar magnet

properties
properties values
Cat. no. 020599
GTIN/EAN 5906301816096
Distributor Dhit sp. z o.o.
Country of origin Poland / China / Germany
Customs code 85059029
length 15 mm [±0,1 mm]
Width 4 mm [±0,1 mm]
Height 1.5 mm [±0,1 mm]
Weight 0.68 g
Magnetization Direction ↑ axial
Load capacity ~ ? 1.39 kg / 13.63 N
Magnetic Induction ~ ? 263.60 mT / 2636 Gs
Coating [NiCuNi] Nickel
Manufacturing Tolerance ±0.1 mm

Magnetic properties of material N38

Specification / characteristics MPL 15x4x1.5 / N38 - lamellar magnet
properties values units
Remanence Br ? 12.2-12.6 kGs
Remanence Br ? 1220-1260 mT
Coercivity bHc ? 10.8-11.5 kOe
Coercivity bHc ? 860-915 kA/m
Intrinsic coercivity iHc ≥ 12 kOe
Intrinsic coercivity iHc ≥ 955 kA/m
Energy product BHmax ? 36-38 BH max MGOe
Energy product BHmax ? 287-303 BH max KJ/m
Maximum working temperature ? ≤ 80 °C

Physical properties of sintered neodymium magnets Nd2Fe14B at 20°C

Physical properties of sintered neodymium magnets Nd2Fe14B at 20°C
properties values units
Vickers hardness ≥550 Hv
Density ≥7.4 g/cm3
Curie Temperature TC 310 °C
Curie Temperature TF 590 °F
Specific resistance 150 μΩ⋅cm
Bending strength 250 MPa
Compressive strength 1000~1100 MPa
Thermal expansion parallel (∥) to orientation (M) (3-4) x 10-6 °C-1
Thermal expansion perpendicular (⊥) to orientation (M) -(1-3) x 10-6 °C-1
Young's modulus 1.7 x 104 kg/mm²

Technical modeling of the assembly - report

These information represent the direct effect of a physical analysis. Results rely on models for the class Nd2Fe14B. Operational performance might slightly differ from theoretical values. Please consider these data as a supplementary guide during assembly planning.

Table 1: Static force (force vs distance) - power drop
MPL 15x4x1.5 / N38

Distance (mm) Induction (Gauss) / mT Pull Force (kg/lbs/g/N) Risk Status
0 mm 2633 Gs
263.3 mT
1.39 kg / 3.06 lbs
1390.0 g / 13.6 N
safe
1 mm 1798 Gs
179.8 mT
0.65 kg / 1.43 lbs
648.2 g / 6.4 N
safe
2 mm 1128 Gs
112.8 mT
0.26 kg / 0.56 lbs
255.2 g / 2.5 N
safe
3 mm 731 Gs
73.1 mT
0.11 kg / 0.24 lbs
107.3 g / 1.1 N
safe
5 mm 355 Gs
35.5 mT
0.03 kg / 0.06 lbs
25.3 g / 0.2 N
safe
10 mm 96 Gs
9.6 mT
0.00 kg / 0.00 lbs
1.8 g / 0.0 N
safe
15 mm 37 Gs
3.7 mT
0.00 kg / 0.00 lbs
0.3 g / 0.0 N
safe
20 mm 17 Gs
1.7 mT
0.00 kg / 0.00 lbs
0.1 g / 0.0 N
safe
30 mm 6 Gs
0.6 mT
0.00 kg / 0.00 lbs
0.0 g / 0.0 N
safe
50 mm 1 Gs
0.1 mT
0.00 kg / 0.00 lbs
0.0 g / 0.0 N
safe

Table 2: Vertical load (wall)
MPL 15x4x1.5 / N38

Distance (mm) Friction coefficient Pull Force (kg/lbs/g/N)
0 mm Raw steel (µ ≈ 0.2) 0.28 kg / 0.61 lbs
278.0 g / 2.7 N
1 mm Raw steel (µ ≈ 0.2) 0.13 kg / 0.29 lbs
130.0 g / 1.3 N
2 mm Raw steel (µ ≈ 0.2) 0.05 kg / 0.11 lbs
52.0 g / 0.5 N
3 mm Raw steel (µ ≈ 0.2) 0.02 kg / 0.05 lbs
22.0 g / 0.2 N
5 mm Raw steel (µ ≈ 0.2) 0.01 kg / 0.01 lbs
6.0 g / 0.1 N
10 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 lbs
0.0 g / 0.0 N
15 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 lbs
0.0 g / 0.0 N
20 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 lbs
0.0 g / 0.0 N
30 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 lbs
0.0 g / 0.0 N
50 mm Raw steel (µ ≈ 0.2) 0.00 kg / 0.00 lbs
0.0 g / 0.0 N

Table 3: Vertical assembly (shearing) - behavior on slippery surfaces
MPL 15x4x1.5 / N38

Surface type Friction coefficient / % Max load (kg/lbs/g/N)
Raw steel
µ = 0.3 30% of nominal force
0.42 kg / 0.92 lbs
417.0 g / 4.1 N
Painted steel (standard)
µ = 0.2 20% of nominal force
0.28 kg / 0.61 lbs
278.0 g / 2.7 N
Oily/slippery steel
µ = 0.1 10% of nominal force
0.14 kg / 0.31 lbs
139.0 g / 1.4 N
Magnet with anti-slip rubber
µ = 0.5 50% of nominal force
0.70 kg / 1.53 lbs
695.0 g / 6.8 N

Table 4: Steel thickness (saturation) - sheet metal selection
MPL 15x4x1.5 / N38

Steel thickness (mm) % power Real pull force (kg/lbs/g/N)
0.5 mm
10%
0.14 kg / 0.31 lbs
139.0 g / 1.4 N
1 mm
25%
0.35 kg / 0.77 lbs
347.5 g / 3.4 N
2 mm
50%
0.70 kg / 1.53 lbs
695.0 g / 6.8 N
3 mm
75%
1.04 kg / 2.30 lbs
1042.5 g / 10.2 N
5 mm
100%
1.39 kg / 3.06 lbs
1390.0 g / 13.6 N
10 mm
100%
1.39 kg / 3.06 lbs
1390.0 g / 13.6 N
11 mm
100%
1.39 kg / 3.06 lbs
1390.0 g / 13.6 N
12 mm
100%
1.39 kg / 3.06 lbs
1390.0 g / 13.6 N

Table 5: Thermal resistance (stability) - power drop
MPL 15x4x1.5 / N38

Magnet temperature (°C) Force change relative to 20°C Remaining pull (kg/lbs/g/N) Status
20 °C 0.0% 1.39 kg / 3.06 lbs
1390.0 g / 13.6 N
Estimate
40 °C -4.4% 1.33 kg / 2.93 lbs
1329.5 g / 13.0 N
Estimate
60 °C -8.6% 1.27 kg / 2.80 lbs
1270.4 g / 12.5 N
Estimate
80 °C -12.8% 1.21 kg / 2.67 lbs
1212.6 g / 11.9 N
Material limit
100 °C — — Out of range — no model

Table 6: Two magnets (attraction) - field collision
MPL 15x4x1.5 / N38

Gap (mm) Attraction (kg/lbs) (N-S) Shear Force (kg/lbs/g/N) Repulsion (kg/lbs) (N-N)
0 mm 2.56 kg / 5.65 lbs
4 051 Gs
0.38 kg / 0.85 lbs
385 g / 3.8 N
N/A
1 mm 1.84 kg / 4.05 lbs
4 460 Gs
0.28 kg / 0.61 lbs
276 g / 2.7 N
1.66 kg / 3.65 lbs
~0 Gs
2 mm 1.20 kg / 2.64 lbs
3 596 Gs
0.18 kg / 0.40 lbs
179 g / 1.8 N
1.08 kg / 2.37 lbs
~0 Gs
3 mm 0.75 kg / 1.65 lbs
2 848 Gs
0.11 kg / 0.25 lbs
113 g / 1.1 N
0.68 kg / 1.49 lbs
~0 Gs
5 mm 0.30 kg / 0.66 lbs
1 805 Gs
0.05 kg / 0.10 lbs
45 g / 0.4 N
0.27 kg / 0.60 lbs
~0 Gs
10 mm 0.05 kg / 0.10 lbs
711 Gs
0.01 kg / 0.02 lbs
7 g / 0.1 N
0.04 kg / 0.09 lbs
~0 Gs
20 mm 0.00 kg / 0.01 lbs
191 Gs
0.00 kg / 0.00 lbs
1 g / 0.0 N
0.00 kg / 0.00 lbs
~0 Gs
50 mm 0.00 kg / 0.00 lbs
19 Gs
0.00 kg / 0.00 lbs
0 g / 0.0 N
0.00 kg / 0.00 lbs
~0 Gs
60 mm 0.00 kg / 0.00 lbs
12 Gs
0.00 kg / 0.00 lbs
0 g / 0.0 N
0.00 kg / 0.00 lbs
~0 Gs
70 mm 0.00 kg / 0.00 lbs
7 Gs
0.00 kg / 0.00 lbs
0 g / 0.0 N
0.00 kg / 0.00 lbs
~0 Gs
80 mm 0.00 kg / 0.00 lbs
5 Gs
0.00 kg / 0.00 lbs
0 g / 0.0 N
0.00 kg / 0.00 lbs
~0 Gs
90 mm 0.00 kg / 0.00 lbs
4 Gs
0.00 kg / 0.00 lbs
0 g / 0.0 N
0.00 kg / 0.00 lbs
~0 Gs
100 mm 0.00 kg / 0.00 lbs
3 Gs
0.00 kg / 0.00 lbs
0 g / 0.0 N
0.00 kg / 0.00 lbs
~0 Gs

Table 7: Axial field levels — not safety zones
MPL 15x4x1.5 / N38

Field level (Gs) mT Model distance (cm)
< 5 Gs < 0.5 mT 3.5 cm
< 10 Gs < 1.0 mT 2.5 cm
< 20 Gs < 2.0 mT 2.0 cm
< 40 Gs < 4.0 mT 1.5 cm
< 50 Gs < 5.0 mT 1.5 cm
< 400 Gs < 40.0 mT 0.5 cm
< 600 Gs < 60.0 mT 0.5 cm

Table 8: Collisions (cracking risk) - warning
MPL 15x4x1.5 / N38

Start from (mm) Speed (km/h) Energy (J) Predicted outcome
10 mm 25.63 km/h
(7.12 m/s)
0.02 J
30 mm 25.66 km/h
(7.13 m/s)
0.02 J
50 mm 25.64 km/h
(7.12 m/s)
0.02 J
100 mm 25.67 km/h
(7.13 m/s)
0.02 J

Table 9: Coating parameters (durability)
MPL 15x4x1.5 / N38

Technical parameter Value / Description
Coating type [NiCuNi] Nickel
Layer structure Nickel - Copper - Nickel
Layer thickness 10-20 µm
Salt spray test (SST) ? 24 h
Recommended environment Indoors only (dry)

Table 10: Electrical data (Flux)
MPL 15x4x1.5 / N38

Parameter Value SI Unit / Description
Magnetic Flux 1 443 Mx 14.4 µWb
Pc Coefficient 0.25 Low (Flat)

Table 11: Underwater work (magnet fishing)
MPL 15x4x1.5 / N38

Environment Effective steel pull Effect
Air (land) 1.39 kg Standard
Water (riverbed) 1.59 kg
(+0.20 kg buoyancy gain)
+14.5%
Corrosion warning: This magnet has a standard nickel coating. After use in water, it must be dried and maintained immediately, otherwise it will rust!

1. Sliding resistance

*Note: On a vertical wall, the magnet retains merely approx. 20-30% of its nominal pull.

2. Efficiency vs thickness

*Thin metal sheet (e.g. computer case) severely weakens the holding force.

3. Temperature resistance

N38: the maximum material working temperature is 80°C. Permitted conditions also depend on the shape and magnetic circuit.

4. Demagnetization curve and operating point (B-H)

chart generated for the permeance coefficient Pc (Permeance Coefficient) = 0.25

The chart above illustrates the magnetic characteristics of the material within the second quadrant of the hysteresis loop. The solid red line represents the demagnetization curve (material potential), while the dashed blue line is the load line based on the magnet's geometry. The Pc (Permeance Coefficient), also known as the load line slope, is a dimensionless value that describes the relationship between the magnet's shape and its magnetic stability. The intersection of these two lines (the black dot) is the operating point — it determines the actual magnetic flux density generated by the magnet in this specific configuration. A higher Pc value means the magnet is more 'slender' (tall relative to its area), resulting in a higher operating point and better resistance to irreversible demagnetization caused by external fields or temperature. At low Pc values (typical for flat magnets, below about 1) the operating point is closer to the 'knee' of the curve — caution is advised when operating at temperatures near the maximum limit to avoid strength loss.

Engineering data and GPSR

Elemental analysis

iron (Fe) 64% – 68%
neodymium (Nd) 29% – 32%
boron (B) 1.1% – 1.2%
dysprosium (Dy) 0.5% – 2.0%
coating (Ni-Cu-Ni) < 0.05%

Environmental data

recyclability (EoL) 100%
recycled raw materials ~10% (pre-cons)
carbon footprint low / zredukowany
waste code (EWC) 16 02 16
Safety card (GPSR)
responsible entity
Dhit sp. z o.o.
ul. Kościuszki 6A, 05-850 Ożarów Mazowiecki
tel: +48 22 499 98 98 | e-mail: bok@dhit.pl
batch number/type
id: 020599-2026
Measurement Calculator

Magnet pull force


Field Strength

Other proposals

This product is a very powerful magnet in the shape of a plate made of NdFeB material, which, with dimensions of 15x4x1.5 mm and a weight of 0.68 g, guarantees the highest quality connection. As a block magnet with high power (approx. 1.39 kg), this product is available off-the-shelf from our warehouse in Poland. Additionally, its Ni-Cu-Ni coating protects it against corrosion in standard operating conditions, giving it an aesthetic appearance.
Separating strong flat magnets requires a technique based on sliding (moving one relative to the other), rather than forceful pulling apart. Watch your fingers! Magnets with a force of 1.39 kg can pinch very hard and cause hematomas. Using a screwdriver risks destroying the coating and permanently cracking the magnet.
They constitute a key element in the production of wind generators and material handling systems. Thanks to the flat surface and high force (approx. 1.39 kg), they are ideal as closers in furniture making and mounting elements in automation. Their rectangular shape facilitates precise gluing into milled sockets in wood or plastic.
For mounting flat magnets MPL 15x4x1.5 / N38, it is best to use two-component adhesives (e.g., UHU Endfest, Distal), which ensure a durable bond with metal or plastic. For lighter applications or mounting on smooth surfaces, branded foam tape (e.g., 3M VHB) will work, provided the surface is perfectly degreased. Avoid chemically aggressive glues or hot glue, which can demagnetize neodymium (above 80°C).
The magnetic axis runs through the shortest dimension, which is typical for gripper magnets. In practice, this means that this magnet has the greatest attraction force on its main planes (15x4 mm), which is ideal for flat mounting. Such a pole arrangement ensures maximum holding capacity when pressing against the sheet, creating a closed magnetic circuit.
The presented product is a neodymium magnet with precisely defined parameters: 15 mm (length), 4 mm (width), and 1.5 mm (thickness). It is a magnetic block with dimensions 15x4x1.5 mm and a self-weight of 0.68 g, ready to work at temperatures up to 80°C. The product meets the standards for N38 grade magnets.

Strengths and weaknesses of Nd2Fe14B magnets.

Benefits

Apart from their notable magnetic energy, neodymium magnets have these key benefits:
  • They have constant strength, and over more than ten years their performance decreases symbolically – ~1% (in testing),
  • They do not lose their magnetic properties even under external field action,
  • Thanks to the elegant finish, the surface of nickel, gold-plated, or silver gives an clean appearance,
  • The surface of neodymium magnets generates a intense magnetic field – this is one of their assets,
  • Through (adequate) combination of ingredients, they can achieve high thermal resistance, allowing for action at temperatures approaching 230°C and above...
  • Possibility of individual creating and modifying to individual needs,
  • Universal use in electronics industry – they are commonly used in data components, electromotive mechanisms, medical devices, as well as complex engineering applications.
  • Relatively small size with high pulling force – neodymium magnets offer strong magnetic field in small dimensions, which makes them useful in miniature devices

Limitations

Disadvantages of neodymium magnets:
  • At very strong impacts they can break, therefore we advise placing them in special holders. A metal housing provides additional protection against damage and increases the magnet's durability.
  • Do not exceed this material temperature limit: 80°C. Overheating may permanently weaken the magnet.
  • Due to the susceptibility of magnets to corrosion in a humid environment, we advise using waterproof magnets made of rubber, plastic or other material immune to moisture, when using outdoors
  • We suggest a housing - magnetic mount, due to difficulties in producing threads inside the magnet and complex shapes.
  • Possible danger resulting from small fragments of magnets are risky, in case of ingestion, which becomes key in the aspect of protecting the youngest. Additionally, tiny parts of these magnets are able to disrupt the diagnostic process medical after entering the body.
  • High unit price – neodymium magnets cost more than other types of magnets (e.g. ferrite), which can limit application in large quantities

Lifting parameters

Maximum holding power of the magnet – what it depends on?

Information about lifting capacity was defined for the most favorable conditions, assuming:
  • using a sheet made of low-carbon steel, acting as a circuit closing element
  • with a thickness minimum 10 mm
  • with a surface perfectly flat
  • without the slightest clearance between the magnet and steel
  • during detachment in a direction vertical to the plane
  • at temperature approx. 20 degrees Celsius

What influences lifting capacity in practice

Real force impacted by working environment parameters, including (from priority):
  • Clearance – the presence of foreign body (rust, dirt, gap) interrupts the magnetic circuit, which lowers power rapidly (even by 50% at 0.5 mm).
  • Angle of force application – maximum parameter is obtained only during pulling at a 90° angle. The shear force of the magnet along the surface is standardly many times lower (approx. 1/5 of the lifting capacity).
  • Element thickness – for full efficiency, the steel must be adequately massive. Paper-thin metal limits the lifting capacity (the magnet "punches through" it).
  • Steel type – mild steel attracts best. Alloy admixtures decrease magnetic properties and holding force.
  • Plate texture – smooth surfaces ensure maximum contact, which improves field saturation. Uneven metal weaken the grip.
  • Thermal environment – temperature increase causes a temporary drop of force. It is worth remembering the maximum operating temperature for a given model.

Lifting capacity testing was performed on a smooth plate of optimal thickness, under perpendicular forces, whereas under shearing force the lifting capacity is smaller. Additionally, even a minimal clearance between the magnet’s surface and the plate lowers the holding force.

Safe handling of neodymium magnets
Risk of cracking

Neodymium magnets are ceramic materials, meaning they are prone to chipping. Impact of two magnets leads to them shattering into small pieces.

Permanent damage

Do not exceed the maximum operating temperature stated in the specifications of the particular product. The limit depends on the material, geometry and operating arrangement; there is no single threshold for all neodymium magnets. Overheating can permanently weaken a magnet.

Keep away from children

Neodymium magnets are not toys. Swallowing multiple magnets may result in them attracting across intestines, which poses a severe health hazard and requires immediate surgery.

Nickel coating and allergies

Certain individuals suffer from a sensitization to nickel, which is the common plating for neodymium magnets. Frequent touching might lead to an allergic reaction. We recommend wear safety gloves.

Bone fractures

Pinching hazard: The attraction force is so immense that it can cause blood blisters, crushing, and broken bones. Protective gloves are recommended.

Mechanical processing

Dust generated during machining of magnets is self-igniting. Avoid drilling into magnets without proper cooling and knowledge.

Threat to electronics

Do not bring magnets close to a wallet, computer, or screen. The magnetism can irreversibly ruin these devices and wipe information from cards.

Caution required

Exercise caution. Rare earth magnets act from a distance and connect with huge force, often faster than you can react.

Magnetic interference

A strong magnetic field interferes with the functioning of magnetometers in phones and GPS navigation. Maintain magnets near a smartphone to prevent damaging the sensors.

Life threat

For implant holders: Strong magnetic fields disrupt electronics. Keep at least 30 cm distance or ask another person to work with the magnets.

Attention! More info about risks in the article: Magnet Safety Guide.